Loading files.
Please wait...
CONTROL
STATUS
POWER
INPUT
LEVEL
VOLUME
MAIN
-55.0dB
ZONE 2
Master Bed
-80.0dB
ZONE 3
Guest
-0.0dB
ZONE 4
Kitchen
-5.0dB
SYSTEM POWER
MAIN VOLUME
16.5dB
PARTY MODE
Volume Step
0.5
5.0
MUTE
©2014 Copyright Yamaha Corporation Visit www.yamaha.com
ZONE 2
1
2
3
4
POWER
VOLUME
16.5dB
Volume Step
0.5
5.0
MUTE
TOP MENU
INPUT
SURROUND
Enhancer
On
Off
INFO Network/USB
PRESET
Artist
Album
Song
Status
I like this song
I don't like this song
INFO iPod
Artist
Album
Song
Status
MODE
Simple
Browse
INFO HD Radio
-
-
-
-
kHz
-
-
-
.
-
-
MHz
1
2
3
4
5
6
7
8
9
CLR
0
ENT
Station
Program Number
Category
Artist
Title
Album
AUDIO MODE
Auto
Mono
RADIO PRESET
PROGRAM NUMBER
102.7
kHz/MHz
TUNER
-
-
-
-
kHz
-
-
-
.
-
-
MHz
1
2
3
4
5
6
7
8
9
CLR
0
ENT
Program Type
Program Service
Radio Text A
Radio Text B
Clock Time
FREQUENCY
102.7
kHz/MHz
BAND
AM
FM
FM MODE
Stereo
Mono
RADIO PRESET
INFO AirPlay
Artist
Album
Song
Status
INFO Spotify
Artist
Album
Track
Status
SETTINGS
Rename
Network
MAC Filter
Auto Reload
Network Standby
Backup/Recovery
Firmware Update
Create Link
Tips
Network Name
Main Zone
Zone 2
Zone 3
Zone 4
Click on "APPLY" button to enable the setting.
Note:
Web Control cannot be used while Rename setting is being applied. (About 30 sec.)
Web Control cannot be used while Rename settings are being applied. (About 30 sec.)
Network Name : It allows strings between 1 to 15 characters long.
Zone Name : It allows strings between 1 to 9 characters long.
Current Network Connection :
-------------------------------------------------------------------------------------------------------
Parameters
Connection Select :
Wired
Wireless (Wi-Fi)
Wireless Direct
SSID
Security Key
Security
DHCP
On
Off
IP Address
Subnet Mask
Default Gateway
DNS Server (P)
DNS Server (S)
Click "APPLY" button to apply settings.
Applying settings will take about 40 seconds.
MAC Address 1
MAC Address 2
MAC Address 3
MAC Address 4
MAC Address 5
MAC Address 6
MAC Address 7
MAC Address 8
MAC Address 9
MAC Address 10
Click on "APPLY" button to enable the MAC address filter.
Note:
Any device with a MAC address not listed above will be denied access
to the receiver.
MAC address filter can only be disabled in the Setup Menu.
This setting is not stored in receiver.
On (default)
Off
"On" will display current receiver status every 5 seconds.
"Off" will not automatically display current receiver status.
Note:
To display the status at any time click the "RELOAD" button
in the bottom right hand corner of the window.
zoom fixed at 1x
zoom fixed at 0.6x
zoom max 1x
zoom max 2x
The desired zoom setting will be applied after rotating the iPhone display.
This setting is not stored in receiver.
Any setting other than default may result in slower page rendering.
[Parameters]
Parameter settings can be entered by editing the URL in the browser:
Insert first parameter after "?" character
Insert multiple parameters using "&" character
Example: http://192.168.0.1/index.html?topmenu=0&zone=1
In this example, the Top Menu button will not be displayed
on the Main control page.
Any combination of the following parameters can be used:
topmenu = 0(no top menu)[default] / 1(On)
zone = 0(TopMenu)[default] / 1(Main) / 2(Zone2) ...
reload = 1(On)[default] / 0(Off)
settings = 1(On)[default] / 0(no settings button)
Parameter settings can be entered by editing the URL in the browser:
Insert first parameter after "?" character
Insert multiple parameters using "&" character
Example: http://192.168.0.1/index.html?topmenu=0&zone=1
In this example, the Top Menu button will not be displayed
on the Main control page.
Any combination of the following parameters can be used:
topmenu = 0(no top menu)[default] / 1(On)
zone = 0(TopMenu)[default] / 1(Main) / 2(Zone2) ...
reload = 1(On)[default] / 0(Off)
settings = 1(On)[default] / 0(no settings button)
[vTuner Yamaha Site]
When entering the receiver's MAC address, make sure to enter a colon ":"
between each set of digits. The format should be "00:00:00:00:00:00"
[Zone Power and Control]
The desired zone must be powered on before attempting to control.
If the zone is not powered on, all settings will be ignored.
The Web Control interface can be customized to display only the desired
control options. Use the checkboxes below to select the desired controls,
and click "Create Link" to generate a new web page. The page can then be
bookmarked for future access.
no top menu button
startup with
no settings
"Auto Reload" off
iphone
Create Link
This option allows the receiver to be powered on via Web Control.
This setting is stored in receiver.
On
Off (default)
"On" : Enables the network standby function.
"Off" : Disables the network standby function.
Save the current setting of this Unit.
Restores settings for this unit that have been saved.
Click on "START" button to start the firmware update
by using the update file stored in a PC.
And wait for 30 seconds to move on to the firmware update page.
Note:
Firmware update may take about 20 minutes.
Don't turn off the power during the update.
BACK